HIP:TS-7000:DHCP Problems

From Earlham Cluster Department

You do not have permission to edit this page, for the following reason:

You can view and copy the source of this page:

== Trying to boot from network? == * Make sure the files in /etc/sysconfig look similar to the ones below; * filename: ifcfg-eth0 DEVICE=eth0 #IPADDR=192.168.0.# #NETMASK=255.255.255.0 #NETWORK=192.168.0.0 #BROADCAST=192.168.0.255 BOOTPROTO=static #BOOTPROTO=dhcp ENABLE=yes * filename: ifcfg-lo DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 BROADCAST=127.255.255.255 ENABLE=yes BOOTPROTO=static * filename: network_cfg ### Technologic Systems ### General Network Configuration File ### NETWORKING=yes GATEWAY=192.168.0.1 GW_DEV=eth0 HOSTNAME="hostname" #BOOTPROTO=static BOOTPROTO=dhcp DEFRAG_IPV4=no FORWARD_IPV4=no == Trying to boot from board? == * filename: ifcfg-eth0 DEVICE=eth0 IPADDR=192.168.0.# NETMASK=255.255.255.0 NETWORK=192.168.0.0 BROADCAST=192.168.0.255 #BOOTPROTO=static BOOTPROTO=dhcp ENABLE=yes * filename: ifcfg-lo DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 BROADCAST=127.255.255.255 ENABLE=yes BOOTPROTO=static * filename: network_cfg ### Technologic Systems ### General Network Configuration File ### NETWORKING=yes GATEWAY=192.168.0.1 GW_DEV=eth0 HOSTNAME="hostname" #BOOTPROTO=static BOOTPROTO=dhcp DEFRAG_IPV4=no FORWARD_IPV4=no

Return to HIP:TS-7000:DHCP Problems.