HIP:PMP:Minicom

From Earlham Cluster Department

(Difference between revisions)
Jump to: navigation, search
Line 29: Line 29:
*Jumper 4 makes output to be readable with minicom
*Jumper 4 makes output to be readable with minicom
Run minicom
Run minicom
-
~$ sudo minicom
+
~$ sudo minicom
Boot PMP
Boot PMP
* minicom should change from offline to online, if the connection is established
* minicom should change from offline to online, if the connection is established

Revision as of 16:34, 10 July 2006

Installing minicom

Alex / Colin will fill this one...

Configuring Minicom for PMP

~$ sudo minicom

If minicom was correctly installed, you shoud see something like this...

Welcome to minicom 2.00.0
OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n 
Compiled on Jan 25 2003, 00:15:18.
Press CTRL-A Z for help on special keys
  1. Press CTRL-A O for 'configurations'
  2. Select 'serial port setup' on the menu
  3. Set A 'serial device' to /dev/ttyS0
  4. Set E 'Bps/Par/Bits' to 115200 8N1
  5. Press Esc and 'save setup as dfl'
  6. Exit minicom

PMP Settings for Output with minicom

  1. Turn off PMP
  2. Connect COM2 of PMP to COM1 of linux machine where minicom is installed
  3. Put on jumpers 2 and 4 on the PMP

Run minicom

~$ sudo minicom

Boot PMP

CTRL-A Z for help |  115200 8N1 | NOR | Minicom 2.00.0 | VT102 |      Offline
CTRL-A Z for help |  115200 8N1 | NOR | Minicom 2.00.0 | VT102 |      Online
Personal tools
Namespaces
Variants
Actions
websites
wiki
this semester
Toolbox