Cluster: New BobSCEd Install Log

From Earlham Cluster Department

(Difference between revisions)
Jump to: navigation, search
(Cloning)
(Cloning)
Line 9: Line 9:
** Install with <code>yum --nogpgcheck localinstall udpcast-20081213-1.i386.rpm</code>
** Install with <code>yum --nogpgcheck localinstall udpcast-20081213-1.i386.rpm</code>
** On hopper, installed the syslinux and tftpd-hpa ports
** On hopper, installed the syslinux and tftpd-hpa ports
-
*** Enable tftpd in <code>/etc/inetd.conf</code> by removing the comments and restart inetd with <code>/etc/rc.d/inetd restart</code>
+
*** Enable tftpd in <code>/etc/inetd.conf</code> by removing the comments and restart inetd with <code>/etc/rc.d/inetd restart</code>, and then also run the command listed on that line to start tftpd
*** The following lines were already in <code>/usr/local/etc/dhcpd.conf: allow booting; allow bootp;</code>, put the filename in the particular group (see [http://debianclusters.cs.uni.edu/index.php/Udpcast_Cloning:_Preparing_the_DHCP_Server_for_PXE_Booting Debian Clusters])
*** The following lines were already in <code>/usr/local/etc/dhcpd.conf: allow booting; allow bootp;</code>, put the filename in the particular group (see [http://debianclusters.cs.uni.edu/index.php/Udpcast_Cloning:_Preparing_the_DHCP_Server_for_PXE_Booting Debian Clusters])
*** <code>cp /usr/local/share/syslinux/pxelinux.0 /tftpboot/</code> (the /tftpboot directory needs to be created)
*** <code>cp /usr/local/share/syslinux/pxelinux.0 /tftpboot/</code> (the /tftpboot directory needs to be created)

Revision as of 20:03, 26 August 2009

Contents

Scratch Space

Log

Green color indicates something that still needs to be done.

Cloning

Head Node

Yum installed:

Install C3 tools from http://www.csm.ornl.gov/torc/C3/C3softwarepage.shtml

Ganglia

Networking

static_routes="bs0"
route_bs0="192.168.0.1 159.28.234.200"

Modules

Torque

Maui

Intel Firmware Updates

Personal tools
Namespaces
Variants
Actions
websites
wiki
this semester
Toolbox