Opened 12 years ago

Closed 10 years ago

#185 closed enhancement (fixed)

Install torque

Reported by: skylar Owned by: fitz
Priority: minor Milestone: Software installation
Component: Both Version:
Keywords: Cc:
Blocked By: Blocking:
Estimated Hours: 0 Total Hours: 0

Description

from sced

Change History (8)

comment:1 follow-up: Changed 10 years ago by fitz

  • Component set to Both
  • Estimated Hours set to 0
  • Owner changed from somebody to fitz
  • Status changed from new to assigned

Configuring with:

   $ ./configure \
        --prefix=/bccd/software/torque/ \
        --with-server-home=/bccd/software/torque/pbs \
        --with-default-server=node000.bccd.net \
        --enable-syslog

comment:2 in reply to: ↑ 1 Changed 10 years ago by fitz

Above complains about a command line that's too long, non-conformity to C90, etc.. Code doesn't conform to strict C99 either, but GNU99 works.

Reconfiguring with:

   $ ./configure \
        --prefix=/bccd/software/torque/ \
        --with-server-home=/bccd/software/torque/pbs \
        --with-default-server=node000.bccd.net \
        --enable-syslog \
       CFLAGS="--std=gnu99"

comment:3 Changed 10 years ago by fitz

pbs_server complains that /bccd/software is not owned by root, cannot have pbs server home set there. Reconfigure with --with-server-home=/etc/pbs

comment:4 Changed 10 years ago by fitz

first go committed to fitz-devel in r2341.

comment:5 Changed 10 years ago by fitz

Ran into an issue whereby pbs_server and pbs_mom fail to communicate when node000's IP is 192.168.3.1 (the default).

comment:6 Changed 10 years ago by fitz

Torque/PBS working in Live mode as seen in fitz-devel, r2441

comment:7 Changed 10 years ago by fitz

Committed to trunk a while back. Works in LIVE, unknown status in LIBERATED.

comment:8 Changed 10 years ago by fitz

  • Resolution set to fixed
  • Status changed from assigned to closed
Note: See TracTickets for help on using tickets.